5-Channel Cable Protector Ramp — Heavy-Duty Protection for High Cable Density Sites
Roadsidesafe 5-channel cable protector ramps route and protect up to five cables or hoses simultaneously across roadways, event sites, construction zones, film sets, and industrial facilities where multiple power, data, and pneumatic lines must cross vehicle or pedestrian traffic areas safely. Deployed by event production companies, utility contractors, mining operations, and stadium operators across Europe, North America, Australia, and the Middle East.
5-Channel vs 3-Channel — When to Use Each
| Feature | 3-Channel | 5-Channel |
|---|---|---|
| Cable capacity | 3 cables/hoses | 5 cables/hoses |
| Width | ~35cm | ~55cm |
| Best for | Standard event/construction sites | Film sets, stadium, mining, utilities |
| Load rating | Up to 20 tons | Up to 20 tons |
Key Features
- 5 Independent Channels: Each channel sized for cables up to 55mm diameter — power, data, pneumatic, hydraulic, or fibre.
- Interlocking Modules: 60cm sections connect end-to-end to cover any crossing width — no limit on run length.
- Heavy-Duty Rubber: Rated for 20-ton vehicle loads — suitable for articulated trucks, heavy plant, and fork lifts.
- High-Visibility Yellow Lid: Contrasting colour alerts drivers and pedestrians to cable crossing zone.
- Hinged Lid: Lid opens for cable insertion and removal without dismantling the run.
- Pedestrian Section Available: Ramped pedestrian section with non-slip tread connects inline with vehicle sections.
Specifications
| Specification | Details |
|---|---|
| Channels | 5 (each up to 55mm diameter) |
| Material | Recycled + virgin rubber composite |
| Module Length | 60cm (interlocking) |
| Width | ~55cm |
| Load Rating | 20 tons per module |
| Lid | Yellow hinged (tool-free cable access) |
| Standards | ISO 9001:2015, IEC cable protection reference |
| MOQ | 5 modules | custom lengths available |
FAQ
Q: Can 5-channel ramps be mixed with 3-channel ramps in the same run?
A: Not directly — they are different widths. However, transition sections are available to step from a 3-channel run to a 5-channel run at a junction point. Contact us for custom crossing layout advice.
Q: What is the maximum cable diameter per channel?
A: Standard: 55mm per channel. For larger cables (65mm+), we offer custom-moulded wide-channel versions — minimum 20 modules for custom production.
Write a review
Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
